Enjoy a flat 50% OFF on Valves, Tubings and Air Source Treatment. Shop now!
Bestsellers
Sort by
Show result
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM17.50
RM35.00

Specification

  • Size : OD 14mm x ID 8.5mm
  • Length : 80m
  • Working Pressure : 40 Bar
  • Color : Yellow
  • Strong pressure resistance
  • Good flexibility
  • Excellent durability against weather, abrasion & chemical
RM175.00
RM350.00
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM32.00
RM64.00
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM87.50
RM175.00
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM160.00
RM320.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 6mm Tube to 1/4" Thread Male Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm to 1/4" Male Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM34.00
  • Ultra softness enalbes to display excellent efficiency in piping
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil. Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Outstanding anti-weather, anti-curve & anti-fatigue.
  • Lightness & softness of hose enable to increase the productivity of piping works. Wide applicable range of temperature.
  • Various tube colors make it easier to distinguish the pipes one another.
RM20.00
RM40.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 8mm Tube to 1/4" Thread Female Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 8mm to 1/4" Female Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM60.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 8mm Tube to 1/4" Thread Male Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 8mm to 1/4" Male Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM35.50
  • Japan Type Pneumatic Quick Coupler.
  • The quick couplers are used to connecting the plastic tubes and other elements in the pneumatic systems.
  • Uncomplicated construction and high quality guarantee easily and quick tubes connection.
  • Tightness is assured by appropriate shape of the coupling.
  • Chrome plated steel body for anti-corrosion.
  • Application for Pneumatic Tools, Air Piping, Air Pressure Equipment.
  • This quick connect fittings are used to build or disrupt the connection of fluid lines.
  • Quick coupling are supplied to a wide range of application such as agricultural, chemical, and hydraulic applications.
  • Heavy-duty,high-quality design.
  • Quick installation.
  • Simple and flexible.
  • Space-saving.
  • The direction of tubing can be changed freely even after installation.
  • The release ring adopts ellipse design to make it more convenient and labor-saving for disconnection.
  • Fluid admitted: Air, Water, Steam, and other liquid.
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Chromed and stainless steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM10.00
RM20.00
  • Working pressure:0.15MP~0.8MPa
  • Fluid: Air
  • Filtering Grade: 40µm
  • Temperature Range: -20~70°C
  • Port Size: 1/4" BSP
  • Capacity of Drain Bowl: 15CC
RM31.50
RM63.00
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 6mm Straight Union Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm Straight Union Push In Quick Fittings
  • Only the above package content, other products are not included.
RM24.50
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM62.50
RM125.00
  • Japan Type Pneumatic Quick Coupler.
  • The quick couplers are used to connecting the plastic tubes and other elements in the pneumatic systems.
  • Uncomplicated construction and high quality guarantee easily and quick tubes connection.
  • Tightness is assured by appropriate shape of the coupling.
  • Chrome plated steel body for anti-corrosion.
  • Application for Pneumatic Tools, Air Piping, Air Pressure Equipment.
  • This quick connect fittings are used to build or disrupt the connection of fluid lines.
  • Quick coupling are supplied to a wide range of application such as agricultural, chemical, and hydraulic applications.
  • Heavy-duty,high-quality design.
  • Quick installation.
  • Simple and flexible.
  • Space-saving.
  • The direction of tubing can be changed freely even after installation.
  • The release ring adopts ellipse design to make it more convenient and labor-saving for disconnection.
  • Fluid admitted: Air, Water, Steam, and other liquid.
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Chromed and stainless steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM2.00
RM2.60
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 6mm Tube to 1/8"Thread Male Elbow Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm to 1/8"Male Elbow Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM42.50
  • Japan Type Pneumatic Quick Coupler.
  • The quick couplers are used to connecting the plastic tubes and other elements in the pneumatic systems.
  • Uncomplicated construction and high quality guarantee easily and quick tubes connection.
  • Tightness is assured by appropriate shape of the coupling.
  • Chrome plated steel body for anti-corrosion.
  • Application for Pneumatic Tools, Air Piping, Air Pressure Equipment.
  • This quick connect fittings are used to build or disrupt the connection of fluid lines.
  • Quick coupling are supplied to a wide range of application such as agricultural, chemical, and hydraulic applications.
  • Heavy-duty,high-quality design.
  • Quick installation.
  • Simple and flexible.
  • Space-saving.
  • The direction of tubing can be changed freely even after installation.
  • The release ring adopts ellipse design to make it more convenient and labor-saving for disconnection.
  • Fluid admitted: Air, Water, Steam, and other liquid.
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Chromed and stainless steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM38.50
RM77.00
  • Ultra softness enalbes to display excellent efficiency in piping
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil. Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Outstanding anti-weather, anti-curve & anti-fatigue.
  • Lightness & softness of hose enable to increase the productivity of piping works. Wide applicable range of temperature.
  • Various tube colors make it easier to distinguish the pipes one another.
RM134.00
RM268.00
  • highly stable performance and long durability
  • Control air pressure at a wide range from 0.05 Mpa to 0.85Mpa
  • Differential pressure discharge design
  • Working pressure: 0.15MP~0.8MPa
  • Fluid: Air
  • Proof Pressure: 1.5MPa(215Psi)
  • Temperature Range: -20~70°C
  • Port Size: 1/4"

 

RM21.50
RM43.00
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 6mm Union Tee Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm Union Tee Push In Quick Fittings
  • Only the above package content, other products are not included.
RM33.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 10mm Tube to 1/4" Thread Male Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 10mm to 1/4" Male Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM46.50
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM128.80
RM257.50
  • Fluid admitted: Air, Water, Steam, and other liquid
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Nickel plated brass
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM150.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 6mm Tube to 1/4"Thread Male Tee Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm to 1/4"Male Tee Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM62.50
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM31.30
RM62.50
  • Ultra softness enalbes to display excellent efficiency in piping
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil. Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Outstanding anti-weather, anti-curve & anti-fatigue.
  • Lightness & softness of hose enable to increase the productivity of piping works. Wide applicable range of temperature.
  • Various tube colors make it easier to distinguish the pipes one another.
RM26.80
RM53.60
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 6mm Tube to 1/8" Thread Male Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm to 1/8" Male Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM30.00
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 6mm Push In Multiple Tee Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm Push In Multiple Tee Quick Fittings
  • Only the above package content, other products are not included.
RM69.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 6mm Tube to 1/4" Thread Male Elbow Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm to 1/4" Male Elbow Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM48.00
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 6mm x 6mm Pneumatic Union Type On/Off Hand Valve
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm x 6mm Pneumatic Union Type On/Off Hand Valve
  • Only the above package content, other products are not included.
RM255.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 10mm Tube to 1/2" Thread Female Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 10mm to 1/2" Female Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM95.00
  • It’s lightweight, tough, safety, corrosion resisting
  • Ideal to use as water pipe or gas pipe
  • Good flexibility
  • Pneumatic system, air tools
  • Vacuum
  • Automation
  • Plant Instrumentation
  • Paint supply lines
  • Construction applications
  • Motion control devices
RM21.00
RM42.00
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 6mm to 4mm Unequal Union Push in Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm to 4mm Unequal Union Push in Quick Fittings
  • Only the above package content, other products are not included.
RM25.50
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 8mm to 6mm Unequal Union Push in Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 8mm to 6mm Unequal Union Push in Quick Fittings
  • Only the above package content, other products are not included.
RM30.00
  • Working pressure: 0.15MP~0.8MPa
  • Fluid: Air
  • Filtering Grade: 40µm
  • Temperature Range: -20~70°C
  • Recommended Lubrication Oil: ISO VG 32 or equivalent
  • Port Size: 1/4"
  • Capacity of Drain Bowl: 15CC
  • Capacity of Oil Bowl: 25CC

 

RM46.00
RM92.00
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 10mm to 6mm Unequal Union Push in Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 10mm to 6mm Unequal Union Push in Quick Fittings
  • Only the above package content, other products are not included.
RM36.50
  • Filter Precision: 25µ
  • Highest Working Pressure: 1.0MPa
  • Ensured Pressure Resistance: 1.5MPa
  • Operating Temperature Range: 5~60°C
  • Range of Adjustable Pressure: 0.05~0.85Mpa
  • Recommended Oil Use: ISO VG 32
  • Container Material: Polycarbonate
  • Protective Cover: Available
  • Port Size: G1/2"
  • Flow Rate: 4000 L/min
  • Drain Type: Manual
RM170.00
RM340.00
  • Ultra softness enalbes to display excellent efficiency in piping
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil. Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Outstanding anti-weather, anti-curve & anti-fatigue.
  • Lightness & softness of hose enable to increase the productivity of piping works. Wide applicable range of temperature.
  • Various tube colors make it easier to distinguish the pipes one another.
RM100.00
RM200.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 6mm Tube to 1/8" Thread Female Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm to 1/8" Female Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM53.50
  • Japan Type Pneumatic Quick Coupler.
  • The quick couplers are used to connecting the plastic tubes and other elements in the pneumatic systems.
  • Uncomplicated construction and high quality guarantee easily and quick tubes connection.
  • Tightness is assured by appropriate shape of the coupling.
  • Chrome plated steel body for anti-corrosion.
  • Application for Pneumatic Tools, Air Piping, Air Pressure Equipment.
  • This quick connect fittings are used to build or disrupt the connection of fluid lines.
  • Quick coupling are supplied to a wide range of application such as agricultural, chemical, and hydraulic applications.
  • Heavy-duty,high-quality design.
  • Quick installation.
  • Simple and flexible.
  • Space-saving.
  • The direction of tubing can be changed freely even after installation.
  • The release ring adopts ellipse design to make it more convenient and labor-saving for disconnection.
  • Fluid admitted: Air, Water, Steam, and other liquid.
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Chromed and stainless steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM15.00
RM30.00
  • Japan Type Pneumatic Quick Coupler.
  • The quick couplers are used to connecting the plastic tubes and other elements in the pneumatic systems.
  • Uncomplicated construction and high quality guarantee easily and quick tubes connection.
  • Tightness is assured by appropriate shape of the coupling.
  • Chrome plated steel body for anti-corrosion.
  • Application for Pneumatic Tools, Air Piping, Air Pressure Equipment.
  • This quick connect fittings are used to build or disrupt the connection of fluid lines.
  • Quick coupling are supplied to a wide range of application such as agricultural, chemical, and hydraulic applications.
  • Heavy-duty,high-quality design.
  • Quick installation.
  • Simple and flexible.
  • Space-saving.
  • The direction of tubing can be changed freely even after installation.
  • The release ring adopts ellipse design to make it more convenient and labor-saving for disconnection.
  • Fluid admitted: Air, Water, Steam, and other liquid.
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Chromed and stainless steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM6.60
RM8.30
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 8mm Union Tee Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 8mm Union Tee Push In Quick Fittings
  • Only the above package content, other products are not included.
RM34.00
  • Japan Type Pneumatic Quick Coupler.
  • The quick couplers are used to connecting the plastic tubes and other elements in the pneumatic systems.
  • Uncomplicated construction and high quality guarantee easily and quick tubes connection.
  • Tightness is assured by appropriate shape of the coupling.
  • Chrome plated steel body for anti-corrosion.
  • Application for Pneumatic Tools, Air Piping, Air Pressure Equipment.
  • This quick connect fittings are used to build or disrupt the connection of fluid lines.
  • Quick coupling are supplied to a wide range of application such as agricultural, chemical, and hydraulic applications.
  • Heavy-duty,high-quality design.
  • Quick installation.
  • Simple and flexible.
  • Space-saving.
  • The direction of tubing can be changed freely even after installation.
  • The release ring adopts ellipse design to make it more convenient and labor-saving for disconnection.
  • Fluid admitted: Air, Water, Steam, and other liquid.
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Chromed and stainless steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM20.00
RM40.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 8mm Tube to 1/8" Thread Male Elbow Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 8mm to 1/8" Male Elbow Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM45.00
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 6mm Y Connector Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm Y Connector Push In Quick Fittings
  • Only the above package content, other products are not included.
RM33.00
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM80.00
RM160.00
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM113.80
RM227.50
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM257.50
RM515.00
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM168.80
RM337.50
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 8mm Tube to 1/4" Thread Male Elbow Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 8mm to 1/4" Male Elbow Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM50.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 8mm Tube to 1/4" Thread L Shape Flow Control Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 8mm to 1/4" L Shape Flow Control Push In Quick Fittings
  • Only the above package content, other products are not included.
RM152.50
  • Ultra softness enalbes to display excellent efficiency in piping
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil. Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Outstanding anti-weather, anti-curve & anti-fatigue.
  • Lightness & softness of hose enable to increase the productivity of piping works. Wide applicable range of temperature.
  • Various tube colors make it easier to distinguish the pipes one another.
RM37.70
RM75.40
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 8mm Tube to 1/8" Thread Female Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 8mm to 1/8" Female Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM58.00
  • Operating Fluid: Air
  • Range of Adjustable Air Pressure: 0.05 - 3.5MPa
  • Max. Input Pressure: 4MPa
  • Operating Temperature Range: -25~800C
RM150.00
RM300.00
  • Fluid admitted: Air, Water, Steam, and other liquid
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Nickel plated brass
  • Body: Stainless Steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM70.00

PARTICULARITY & USE

  • Chemical-resistance is excellent.
  • Heat-resistance and cold-resistance is excellent.(-6S°C~260°C)
  • Excellent transparency enables the confirmation of inner fluid.
  • Steam heater in which gas and liquid move of high pressure, high temperature.
  • Transportation tube of chemicals for semiconductor manufacture facility.
RM1,750.00
RM3,500.00
  • Ultra softness enalbes to display excellent efficiency in piping
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil. Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Outstanding anti-weather, anti-curve & anti-fatigue.
  • Lightness & softness of hose enable to increase the productivity of piping works. Wide applicable range of temperature.
  • Various tube colors make it easier to distinguish the pipes one another.
RM57.00
RM114.00
  • Japan Type Pneumatic Quick Coupler.
  • The quick couplers are used to connecting the plastic tubes and other elements in the pneumatic systems.
  • Uncomplicated construction and high quality guarantee easily and quick tubes connection.
  • Tightness is assured by appropriate shape of the coupling.
  • Chrome plated steel body for anti-corrosion.
  • Application for Pneumatic Tools, Air Piping, Air Pressure Equipment.
  • This quick connect fittings are used to build or disrupt the connection of fluid lines.
  • Quick coupling are supplied to a wide range of application such as agricultural, chemical, and hydraulic applications.
  • Heavy-duty,high-quality design.
  • Quick installation.
  • Simple and flexible.
  • Space-saving.
  • The direction of tubing can be changed freely even after installation.
  • The release ring adopts ellipse design to make it more convenient and labor-saving for disconnection.
  • Fluid admitted: Air, Water, Steam, and other liquid.
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Chromed and stainless steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM10.00
RM20.00
  • Filter Precision: 25µ
  • Highest Working Pressure: 1.0MPa
  • Ensured Pressure Resistance: 1.5MPa
  • Operating Temperature Range: 5~60°C
  • Container Material: Polycarbonate
  • Protective Cover: Available
  • Port Size: G1/2"
  • Flow Rate: 4000L/min
  • Drain Type: Manual
RM45.00
RM90.00
  • Application: Water, Oil, Gas, Air
  • Material: Brass
  • Temperature: -54°C ~ 120°C
  • Working Pressure: 320psi (Max)
RM7.50
RM15.00
  • Highest Working Pressure: 1.0MPa
  • Ensured Pressure Resistance: 1.5MPa
  • Operating Temperature Range: 5~60°C
  • Range of Adjustable Pressure: 0.05~0.85Mpa
  • Port Size: G1/4"
  • Flow Rate: 550 L/min
RM35.00
RM70.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 6mm Tube to 3/8" Thread Male Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm to 3/8" Male Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM48.00
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM12.50
RM25.00
  • Fluid admitted: Air, Water, Steam, and other liquid
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Nickel plated brass
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM180.00
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 4mm Push In Plug Pneumatic Air Quick Fittings
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 4mm Push In Plug Pneumatic Air Quick Fittings
  • Only the above package content, other products are not included.
RM14.00
  • Application: Water, Oil, Gas, Air
  • Material: Brass
  • Temperature: -54°C ~ 120°C
  • Working Pressure: 460psi (Max)
RM6.50
RM8.20
  • Appropriate to multiful piping for air, water, oil & chemical
  • Superior anti-pressure, anti-vibration, anti-rust, anti-heat, anti-chemical & anti-oil.
  • Light weight & softness enable to increase the porductivity of piping works.
  • Wide applicable range of temperature.
  • Low-absorptive rate, low physical performance deterioration & low & changeable rate of measurement.
  • Superior anti-weather, anti-curve & anti-fatigue.
  • Working temperature range -20°C~80°C
RM337.50
RM675.00
  • Fluid admitted: Air, Water, Steam, and other liquid
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Nickel plated brass
  • Body: Stainless Steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM90.00
  • Fluid admitted: Air, Water, Steam, and other liquid
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Nickel plated brass
  • Body: Stainless Steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM100.00
  • Japan Type Pneumatic Quick Coupler.
  • The quick couplers are used to connecting the plastic tubes and other elements in the pneumatic systems.
  • Uncomplicated construction and high quality guarantee easily and quick tubes connection.
  • Tightness is assured by appropriate shape of the coupling.
  • Chrome plated steel body for anti-corrosion.
  • Application for Pneumatic Tools, Air Piping, Air Pressure Equipment.
  • This quick connect fittings are used to build or disrupt the connection of fluid lines.
  • Quick coupling are supplied to a wide range of application such as agricultural, chemical, and hydraulic applications.
  • Heavy-duty,high-quality design.
  • Quick installation.
  • Simple and flexible.
  • Space-saving.
  • The direction of tubing can be changed freely even after installation.
  • The release ring adopts ellipse design to make it more convenient and labor-saving for disconnection.
  • Fluid admitted: Air, Water, Steam, and other liquid.
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Chromed and stainless steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM33.00
RM66.00
  • Application: Water, Oil, Gas, Air
  • Material: Brass
  • Temperature: -54°C ~ 120°C
  • Working Pressure: 460psi (Max)
RM10.00
RM13.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 6mm Tube to 3/8" Thread Male Elbow Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm to 3/8" Male Elbow Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM50.00
  • Long-life, high-performance air valves
  • Brand: SWISH
  • Connection:Threaded
  • Working Medium:40 Micron Filtered Air
  • Operation:Internal Piloted
RM40.00
RM80.00
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 6mm Push In Plug Pneumatic Air Quick Fittings
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm Push In Plug Pneumatic Air Quick Fittings
  • Only the above package content, other products are not included.
RM17.00
  • Operating Fluid: Air
  • Working of Adjustable Air Pressure: 0.15 - 3.5MPa
  • Filtering Eliment Roughness: 20µm or 40µm
  • Max. Input Pressure: 4MPa
  • Operating Temperature Range: -25~800C
RM240.00
RM480.00
  • Material: Brass
RM6.50
RM8.20
  • 4 ports type, plastic lever, 90 degree operating angle.
  • This hand lever valve is a device that regulates, directs or controls the flow of fluid by opening, closing, or partially obstructing various passageways.
  • Simply structure, easy maintenance and simple operation.
  • The direction-change turns lightly with good hand feeling and exact orientation.
  • Large effective circulating area leads to little pressure loss.
  • Model: 4HV230-08
  • Operating Angle: 90°
  • Material: Plastic, Metal
  • Working Pressure: 0 - 1.0 MPa
RM55.00
RM110.00
  • Manual control valve, same direction with the spool. Easy control, precise and reliability.
  • Spool type design, excellent sealing performance, compact size, lighter weight, easy repairing.
  • Internal hole adopts special processing technology which has little attrition friction, low start pressure and long service life.
  • No need to add oil for lubrication.
  • Multi-mounting helps to install and apply.
  • Working Pressure: 0 - 1.0 MPa
  • Operating Temperature: 0 - 60℃
  • Material of Body: Aluminium alloy
RM35.00
RM70.00
  • Brand: No brand
  • Material: Plastic, durable and reusable
  • Type: 10mm Y Connector Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 10mm Y Connector Push In Quick Fittings
  • Only the above package content, other products are not included.
RM42.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 12mm Tube to 1/4" Thread Female Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 12mm to 1/4" Female Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM73.00
  • Japan Type Pneumatic Quick Coupler.
  • The quick couplers are used to connecting the plastic tubes and other elements in the pneumatic systems.
  • Uncomplicated construction and high quality guarantee easily and quick tubes connection.
  • Tightness is assured by appropriate shape of the coupling.
  • Chrome plated steel body for anti-corrosion.
  • Application for Pneumatic Tools, Air Piping, Air Pressure Equipment.
  • This quick connect fittings are used to build or disrupt the connection of fluid lines.
  • Quick coupling are supplied to a wide range of application such as agricultural, chemical, and hydraulic applications.
  • Heavy-duty,high-quality design.
  • Quick installation.
  • Simple and flexible.
  • Space-saving.
  • The direction of tubing can be changed freely even after installation.
  • The release ring adopts ellipse design to make it more convenient and labor-saving for disconnection.
  • Fluid admitted: Air, Water, Steam, and other liquid.
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Chromed and stainless steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM20.00
RM40.00
  • Brand: No brand
  • Material: Metal Chrome Body with Plastic Cap, durable and reusable
  • Type: 6mm Union BulkheadPush in Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm Union Bulkhead Push In Quick Fittings
  • Only the above package content, other products are not included.
RM83.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 12mm Tube to 1/2" Thread Male Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 12mm to 1/2" Male Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM88.00
  • Brand: No brand
  • Material: Plastic Body, durable and reusable
  • Type: 6mm Union Type Flow Control Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Elliptical release ring help to connect the tube easily by manual with no special tools required
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 6mm Union Type Flow Control Push In Quick Fittings
  • Only the above package content, other products are not included.
RM158.00
  • Fluid admitted: Air, Water, Steam, and other liquid
  • Max. Working Pressure: 3.0 Mpa
  • Working Temperature: -20 to 200 °C
  • Material: Nickel plated brass
  • Body: Stainless Steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
  • High precision automatic lathe to make the claws not hurt tube surface.
  • Easy to push in and put out on the basis of working pressure assured.
RM70.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 12mm Tube to 1/4" Thread Male Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 12mm to 1/4" Male Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM65.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 8mm Tube to 1/2" Thread Female Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 8mm to 1/2" Female Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM53.50
  • Bore Size: 50mm
  • Stroke: 50/75/100/150/200mm
  • Medium: Air
  • Operating Pressure: 1.35MPa
  • Temperature: -5°C ~ 70°C
  • Port Size: 1/4"
RM91.04
RM113.80
  • Japan Type Pneumatic Quick Coupler.
  • The quick couplers are used to connecting the plastic tubes and other elements in the pneumatic systems.
  • Uncomplicated construction and high quality guarantee easily and quick tubes connection.
  • Tightness is assured by appropriate shape of the coupling.
  • Chrome plated steel body for anti-corrosion.
  • Application for Pneumatic Tools, Air Piping, Air Pressure Equipment.
  • This quick connect fittings are used to build or disrupt the connection of fluid lines.
  • Quick coupling are supplied to a wide range of application such as agricultural, chemical, and hydraulic applications.
  • Heavy-duty,high-quality design.
  • Quick installation.
  • Simple and flexible.
  • Space-saving.
  • The direction of tubing can be changed freely even after installation.
  • The release ring adopts ellipse design to make it more convenient and labor-saving for disconnection.
  • Fluid admitted: Air, Water, Steam, and other liquid.
  • Max. Working Pressure: 2.0 Mpa
  • Working Temperature: -20 to 120 °C
  • Material: Chromed and stainless steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM10.00
RM20.00
  • Fluid admitted: Air, Water, Steam, and other liquid
  • Max. Working Pressure: 3.0 Mpa
  • Working Temperature: -20 to 200 °C
  • Material: Nickel plated brass
  • Body: Stainless Steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM160.00
  • Fluid admitted: Air, Water, Steam, and other liquid
  • Max. Working Pressure: 3.0 Mpa
  • Working Temperature: -20 to 200 °C
  • Material: Nickel plated brass
  • Body: Stainless Steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM268.00
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 8mm Tube to 3/8" Thread Female Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 8mm to 3/8" Female Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM72.50
  • Brand: No brand
  • Material: Plastic Body with Metal Thread, durable and reusable
  • Type: 10mm Tube to 1/2" Thread Male Connector Pneumatic Air Push In Quick Fittings
  • Recommended Tubing Material: Polyurethane, Nylon, Polyethylene, Polypropylene
  • Simple push in design for connecting to the tube and provide secure connection with no extra sealing required.
  • The direction of the tube can be changed freely after installation
  • Temperature: 0 to 60°C
  • Fluid: Air - Water - Vacuum
  • Pressure: 0 -1 (Mpa) Max
  • Warranty Type: No warranty
  • Package included: 1 x 10mm to 1/2" Male Connector Pneumatic Air Push In Quick Fittings
  • Only the above package content, other products are not included.
RM87.00
  • Material: Brass
RM4.80
RM6.00
  • Material: Brass
RM15.00
RM19.00
  • Fluid admitted: Air, Water, Steam, and other liquid
  • Max. Working Pressure: 3.0 Mpa
  • Working Temperature: -20 to 200 °C
  • Material: Nickel plated brass
  • Body: Stainless Steel
  • Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
RM100.00